Model 675传感器

Overview 

Description 
The Model 675 is specifically designed for slurry and highly viscous applications where clogging of the sensor area is common. The Model 675 uses a 3.5” flush diaphragm to prevent unwanted clogging of the sensing area. This submersible level device is made of 316SS which offers outstanding environmental protection and is available in depths up to 138 feet of water. 

The non-fouling flush diaphragm and cage assembly are designed to eliminate unwanted buildup of debris, fats, oils, greases, and other bio-solids by eliminating any potential gaps on the measurement area. The high integrity seal’s heavy construction eliminates the effects of turbulence on the sensor. 

The 675 Series Transmitters indicate the level of liquid by continuously measuring hydrostatic pressure via its sensing element, an ion implanted silicon semiconductor chip with integral Wheatstone Bridge circuit. Once the sensor measures the pressure, the data is transmitted by a 4 to 20 mA output signal. This design provides for excellent reliability in remote and inaccessible locationss. 

The Model 675 is approved for intrinsically safe operation in hazardous locationss as designated by Class I, Div 1, Groups A, B, C & D and Class II, Groups E, F & G. when used with an approved barrier. 

All Model 675 transmitters are equipped with a sealed cable termination area and moisture absorbing desiccant. The purpose is to restrict moisture from entering the transmitter through the cable vent. 

Features 
• Oversized 3.5” flush diaphragm to prevent clogging 
• 0.25% Full Scale Accuracy 
• Intrinsically Safe for Class 1 Division 1 
• Custom Pressure Ranges & Cable Lengths 
• Extremely rugged 316L SS construction 
• Two-wire, 4-20 mA standard output 
• Reverse polarity and surge protection 

Applications 
• Lift Stations 
• Sewage Levels 
• Slurries 
• Storm Runoffs 
• Pump Control

Ranges: 
Custom ranges available upon request 
Feet of Water - 0/14, 0/35, 0/69, 0/138 
PSI - 0/6, 0/15, 0/30, 0/60 
Meters of Water - 0/4, 0/10, 0/21, 0/42 
BAR - 0/14, 0/35, 0/69, 0/138 

Output: 
4 to 20 mA, 2 wire, current limited to 30 mA DC 

Power Supply: 
12 to 40 VDC with reverse polarity surge protection; Limited to 28 VDC for Intrinsic Safety with Approved Power Supply. 

Loop Resistance: 
1400 ohms maximum at 40 volts 

Temperature Range: ** 
Ambient Operating: -25° to 180°F (-32° to 82°C) 
Storage: -40° to 180°F (-40° to 82°C) 
** If submerged in a liquid that has frozen, damage will result. Limit high temperature to 140°F (60°C) for intrinsically safe operation. 

Overrange Effect: 
±0.15% full scale at 200% of maximum range 

Overrange Limit: 
200% of maximum range 

Burst Pressure: 
3X Upper Range Limit 

Accuracy: 
±0.25% full scale, BFSL (including linearity, hysteresis and repeatability) 

Zero Offset: 
±1.00% full scale set at 77°F (25°C) 

Span: 
±0.50% full scale set at 77°F (25°C) 

Temperature Effects: 
Compensated: 32° to 122°F (0°C to 50°C); 
Maximum: ±2.5% URL output change for ±25°C temperature change within compensated range when calibrated at 25°C. Consult factory for lower or alternate pressure ranges. 

Power Supply Effect: 
±0.005% full scale per volt 

Diaphragm Seal: 
316L SS construction with 4.75” OD and 3.5” sensing area 

Construction: 
 

Media Compatibility: 
Reference materials of construction 

Electrical Connection: 
Attached 22 gauge, vented, polyurethane, shielded, cable. Unspliced lengths available up to 5000 ft. (1662 m) 

Weight: 
7 lb. 3 oz (Without cable)Cable) 

该产品由深圳市妖精视频在线观看入口电子科技有限公司提供,销售商地址位于深圳市南山区前海路振业国际商务中心1206。请您仔细阅读产品使用说明书,正确使用。

如果想试用该产品,请以下单位: 

妖精视频在线观看入口电子主要销售通信设备、仪器仪表、电力设备、热工仪表、校准设备及工具配件。